To Catch a burbot

Catch a burbot just hard to find it. So at the beginning does not collect tackle tricky to catch burbot, and then the details of how and where to find it.
For catching burbot do not need a lot of gear. Burbot bite in the evening and at night. In order to catch the fish, we need the following gear: cargo, bends, hooks, fishing line, leashes, rod, bait feeder reel and a knife.
This is the minimum to catch burbot.
Now take a feeder rod and assemble burbot fishing tackle. Before you gather gear, I want to mention a very important point burbot fishing - it is desirable not to scatter all order on the bank, because in the dark can be
damage to equipment, in the end, something to forget. If you are using multiple rods with rings, make sure that the fishing line that had passed through all the rings and nowhere perehlestnulas. It seems unimportant, but on every fishing trip with someone happens. We take the usual feeder rod and attach the feeder reel. It does not matter what rod you choose - expensive or cheap. The coil can be equipped with a cord, it is not necessary, but within a cord catch comfortably. None, even the thickest cord, burbot not scare. On the contrary it will be thicker than the less likely break tackles in his favorite places strong.

After that, the cord is threaded through the rings, it is better to come out fishing before dark, then it will be easier to do, because in small rings feeder rods hard punch in the dark fishing line. Need to take care of that was some light. It is best to have a flashlight, but you can do various other things, such as a fire, plexiglass, but the torch will still feel most comfortable. The best lights for night fishing fairly consider headlamps.
After collecting the rods start to do with his usual dead donk. The process of making Donkey is not a complicated and requires a minimum set of elements. It is best to use the outlets, although you can do without them. There are many designs of taps: single, double, or so-called rocker. I prefer to use a single tap with rotating wire and the fixed axis, which carries the sinker. This design prevents twisting tackle when fishing for burbot on the course. Fisherman's knot tie allotment - fishing line is threaded into a ring removal, then made a loop, the line wrapped around the loop 4-5 times, which is threaded in and tightened into a knot. After this allotment to secure cargo. It is advisable to choose an elongated load.

When fishing ling Donka sinkers may be used any type, fished on a pure bottom, it may be a ball, a ring or a spoon. If the bottom is rocky or hard zakoryazheno preferably elongated sinker, reminiscent of a drop, but also among those shipped the clear leader in terms of convenience is a boat. It shipped with sweeps as it takes off at the bottom and much less often enters the flail.
Tackle almost assembled, it remains only to attach the leash. The leash must be from 20 to 40 cm from a strong fishing line diameter of at least 0.2 mm., Equipped with a hook № 7-10 with a long forearm. Leads to better prepare in advance and ready to povodochnitsa leashes greatly facilitate your life on a fishing trip.
As you already understood, burbot caught the usual dull Donka. It consists of rigid rods, 4-5 meters long, the main fishing line with a diameter of 0.3-0.4 mm. (Length of fishing line should be equal to the length of the rod), which is shipped with a loop attached to the end of the main line, a lead diameter of 0.2-0.25 mm. length of 25-35 cm and a hook № 7-10 with a long forearm. Subject to any variation of this equipment, you can use the coil, although it does not help the angler can use a feeder, Bolognese rod, but the essence of gear that does not change - there is a donk donk. If the bottom of the reservoir is clean enough a tackle can be used even without the rod, producing a casting and fish playing hands.